One pair of mono block amps......hand made custom EVS amps.  These mono blocks use the same circuit as my reference amps.  You might call the circuit a hybrid chip/discrete amp.  It uses the new National Semi amp driver module driving a class A/B mosfet output stage.  This amp sounds better than any of the class D amps that I modded and sold the older (including Nuforce, UCD and IcePower).  The output stage is super, super simple......a single resistor sets bias, a single resistor is series with the gate of each Mosfet and then the sources of the Mosfets are wired directly outside the amp and wrapped around the binding posts....no zobel, no inductor, no relays, no nothing else on the output.  The driver stage has its own power supply and so does the output stage so no interaction.  Each mono block is powered by a 500 watt Plitron toroidal transformer ($125 each, my cost) mounted off the chassis on a piece of plywood for best sound.  The input jacks are OFC.  Input impedance is 49K and the gain is 26db (20 times).  I can set the gain higher if you need it.  I can wire the amps as 25 watt very high bias class A/B for best sound (the way I use them.....driving 88db speakers to over 95 db) but if you need some serious power I can wire the transformer to give twice the voltage and then you will get at least 150 watts but I will have to turn the bias down.  These amps are sold with a money back guarantee (30 days) and two years of warrantee.  $1200 the pair including shipping within the continental US.  These amps will be finished by the end of February.  They have black chassis with simple faceplates with no markings....plain and simple.  I will supply two ordinary power cords, but of course, you will want some better cords for them.  Call for more details.....831-338-2896

Early Winter cleaning/preening....time to let some stuff go:

2 sets of DH cones:  
1 set of the Supers never used ($190 list for set of 3)  sell for $55 the set. 
1 set slightly used Supers $50.
plus $5 for air mail for one set and $10 for both sets.

3 used Burson regulators (original shunt type) Two are positive voltage and one is negative.  $10 each.

1 used Audiocom Invisus II regulator plus 5V.  $35....these were something like $150 originally.

2 Tentlabs: one plus 15 volt shunt regulator and one minus 15V shunt regulator....used and modified.  $20 for both.